Suunto VYPER Instrucciones de operaciones descargar pdf (Pagina 98)

9.3. Replacing the battery

The battery and the buzzer are located in the back of the instrument in a separate

compartment. To change the battery:

Remove the computer from the console or boot.

Wrist model:

•

Pull off the boot. Remove it first from the front end with the longer part of the

strap.

•

Disassemble the shorter part of the strap with a flat 1.5 mm screwdriver or a

special tool for spring bars. The longer part of the strap may stay on but re-

moving it may ease the work later on.

Console model:

•

Remove the dive computer from the console according the instructions of the

console.

Thoroughly rinse and dry the computer.

Open the securing ring of the battery compartment lid by pushing it down and

rotating it clockwise. You may use a pointed nose pliers or a small screwdriver

as an aid in the rotating. Put the pliers ends into the holes of the securing ring or

the screwdriver onto the side of the right tooth on the ring and turn the ring

clockwise. Be careful not to damage any of the parts.

Remove the ring.

Carefully remove the lid with the beeper attached to it. You can remove the lid by

pressing with your finger on the outermost edge of the lid while simultaneously

pulling with your nail at the opposite side. Don't use sharp metal objects as they

might damage the O-ring or the sealing surfaces.

Remove the O-ring and the battery retainer.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 121 122

Sin comentarios

Suunto VYPER Instrucciones de operaciones Pagina 98