Suunto VYPER Instrucciones de operaciones descargar pdf (Pagina 38)

5.5. Error conditions

The dive computer has warning indicators that alert you to react to certain situations

that would significantly increase the risk of DCI. If you do not respond to its warnings,

the dive computer will enter an Error mode, indicating that the risk of DCI has greatly

increased. If you understand the dive computer and operate it sensibly, it is very unlikely

you will ever put the instrument into the Error mode.

Omitted decompression

The Error mode results from omitted decompression, for example, when you stay

above the ceiling for more than three minutes. During this three-minute period the Er

warning is shown and the audible alarm beeps. After this, the dive computer enters a

permanent Error mode. The instrument will continue to function normally if you descend

below the ceiling within this three-minute period.

When the dive computer is in the permanent Error mode, only the Er warning is shown

in the center window. The dive computer does not show times for ascent or stops.

However, all the other displays function as before to provide information for ascent.

You must immediately ascend to a depth of 3 to 6 m/10 to 20 ft and remain at this

depth until air supply limitations require you to surface.

After surfacing, you should not dive for a minimum of 48 hours. During the permanent

Error mode, the Er text is displayed in the center window and the planning mode is

disabled.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 121 122

Sin comentarios

Suunto VYPER Instrucciones de operaciones Pagina 38